Floor plates in place, starting to set the vertical stab | Builder's Logs
STAGING — a test copy of hangarflying.com. Nothing here is real.
logo
Back To Blog
Previous Post
Floor plates in place, starting to set the vertical stab
Expenses:  $0.00
Hours:  0.00
Feb 05, 2024

Got the rest of the rivnuts in.  For the tight spots, I just turn a screw carefully in the rivnut whilst holding it to get it to bind properly.

Set the tail (checked with the rudder in place).  I drilled a pilot hole, but my 3/16" bit is way to dull, so I'll finish after a trip to Aircraft Spruce